Screening a porch needs particular method. There is a traditional method; it has much remained for a couple of years with the same. That is unfortunate because it is a system that flawed. Some small staples or tacks are used in attaching your screening to your porch posts and also railings. After that, the battens of narrow wood are nailed up. It has function to conceal the fasteners and also the seams. This is the method labor intensive. And the screens are installed this way identically to develop sags that noticeable after a few months only. Not only about that, but also when it is necessary to fix a sagging or replace the damaged screen, we have to remove some battens and also yank out about a hundred fasteners. But there is an easier and better way to install the screens. It also does not need much experience. The project will show us about how to re-screen the existing porch by using installation system of screen tight. Here, we can also use same techniques for remodeled or even new breezeways, porches, enclosures, deck, and gazebos.
In this article we are so glad to provide you with some ideas, pictures, and also information about screened in porch plans, especially how to install it. The first thing you have to do is removing the wood battens, after that you must remove your old screening, and then installing vertical base strips. After that you can continue by trimming the base strips, and then installing the screening. The next step is trimming away the excess. After that, we must reinforce our bottom screen. Then, time to install the wide cap trim. And then, continue by installing the narrow cap trim. After that, you can start to install the base strip trim. And the last step is installing the screen door. We think it is quite easy. Hope you get the best work. So, have fun working!
